Table saws / Buying guide
Choosing a blade for the Bosch 4100
Start with compatibility, then choose for the material and cut you make most often.
Read the guide : Choosing a blade for the Bosch 4100Buying guide
Can the Bosch 4100 use a dado stack?
Understand the documented limits and the required components before ordering a set.
Research-based guidance, with any historical owner observations identified. No new hands-on test results are claimed.
The short answer
The linked original 4100/4100DG manual permits a stacked dado setup within its stated limits. That is a model-specific allowance, not permission to install any dado set that appears to fit.
What the original manual specifies
The referenced manual sets a maximum dado diameter of 8 inches and a maximum width of 13/16 inch, and requires the Bosch TS1007 insert with the appropriate washer arrangement. Read the full instructions for configuration and operation; these headline limits are not installation steps.
The insert is part of the system
Bosch describes the TS1007 as an insert for stacked dado and rabbet cutters and lists the 4000, 4100 and 4100XC in its compatibility information. The accessory includes a dado washer. Confirm the correct arrangement using both the saw and accessory documentation.
Before ordering
| Verify | Reason |
|---|---|
| Exact saw model | Avoid carrying specifications across similarly named versions. |
| Set dimensions and intended use | A product title is not a full specification. |
| Insert and required components | Account for the complete approved setup, not just the cutters. |
| The joint you need | Determine whether dado capability solves the actual project requirement. |
Compare the full cost with the work ahead
If you expect to make the same kind of joint repeatedly, the setup may earn its place. For a single project, compare equipment cost, setup time and the other suitable methods available in your shop. A feature you might use someday need not determine every purchase today.
No new joint-fit or cutting test is claimed here. This guide establishes the documentation to consult before choosing equipment. Start with model identification if your saw’s version is uncertain.
Sources & scope
Sources consulted September 6, 2026. 4100/4100DG dado instructions · Bosch TS1007
Match the saw and accessory instructions to your exact model before purchase or use.
NEXT IN THE BOSCH 4100 LIBRARY
Bosch 4100 fence alignment: check before upgrading →KEEP EXPLORING
Next on your workbench.
Table saws / Tool comparison
Bosch 4100 crosscut sled or miter gauge?
Compare the work, storage and setup involved before replacing the supplied gauge.
Read the guide : Bosch 4100 crosscut sled or miter gauge?Table saws / Workshop guide
Bosch 4100 dust collection: plan the complete connection
Think through the saw, hose, collection equipment and storage as one setup.
Read the guide : Bosch 4100 dust collection: plan the complete connection